Hi,
I'm running testing on a Beelink U59 mini pc. It has been fine until the 6.9 kernel but since then, within a minute or two of booting I get display corruption and the machine restarts. I just tried with 6.10.6 and still get the same issue. I don't see anything that looks related in the log - just a load of @ characters and then the start of the next boot.
I'm not sure if I should report it as a bug, or how to go about doing that. I haven't really found anyone reporting the same thing, so can't rule out it being something specific to my setup.
It's not related to the X server - it still happens if I disable it. The only way I can prevent it crashing is to disable the i915 module, but then I can't get the X server to work.
I thought a generic graphics driver might be enough for what I need, but I can't get it to work. The xorg vesa module says "Refusing to run, Framebuffer or dri device present". And fbdev says "Unable to find a valid framebuffer device". What would be the right approach to set up something like that?
This is the graphics information, running on 6.8.12:
i915 dmesg output from 6.9.9:
i915 dmesg output from 6.8.12 (looks like just extra informational messages):
I'm running testing on a Beelink U59 mini pc. It has been fine until the 6.9 kernel but since then, within a minute or two of booting I get display corruption and the machine restarts. I just tried with 6.10.6 and still get the same issue. I don't see anything that looks related in the log - just a load of @ characters and then the start of the next boot.
I'm not sure if I should report it as a bug, or how to go about doing that. I haven't really found anyone reporting the same thing, so can't rule out it being something specific to my setup.
It's not related to the X server - it still happens if I disable it. The only way I can prevent it crashing is to disable the i915 module, but then I can't get the X server to work.
I thought a generic graphics driver might be enough for what I need, but I can't get it to work. The xorg vesa module says "Refusing to run, Framebuffer or dri device present". And fbdev says "Unable to find a valid framebuffer device". What would be the right approach to set up something like that?
This is the graphics information, running on 6.8.12:
Code:
# inxi -GxxGraphics: Device-1: Intel JasperLake [UHD Graphics] driver: i915 v: kernel arch: Gen-11 ports: active: HDMI-A-3 empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:4e61 Device-2: Huawei UVC Camera driver: snd-usb-audio,uvcvideo type: USB rev: 2.1 speed: 480 Mb/s lanes: 1 bus-ID: 1-4.4.2:14 chip-ID: 12d1:4321 Device-3: Conexant Systems (Rockwell) Geniatech T230 DVB-T2 TV Stick driver: dvb_usb_dvbsky type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 1-4.4.4:16 chip-ID: 0572:c688 Display: x11 server: X.org v: 1.21.1.11 driver: X: loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 tty: 157x60 Monitor-1: HDMI-A-3 model: Idek Iiyama PL2409HD res: 1920x1080 dpi: 94 diag: 598mm (23.5") API: EGL v: 1.5 platforms: device: 0 drv: iris device: 1 drv: swrast gbm: drv: iris surfaceless: drv: iris inactive: wayland,x11 API: OpenGL v: 4.6 compat-v: 4.5 vendor: mesa v: 24.1.3-2 note: console (EGL sourced) renderer: Mesa Intel UHD Graphics (JSL), llvmpipe (LLVM 17.0.6 128 bits)Code:
[ 7.429495] i915 0000:00:02.0: [drm] VT-d active for gfx access[ 7.429959] i915 0000:00:02.0: vgaarb: deactivate vga console[ 7.430033] i915 0000:00:02.0: [drm] Using Transparent Hugepages[ 7.436009] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem[ 7.438234] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9)[ 7.704335] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])[ 7.720067] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0[ 7.822266] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])[ 7.824110] fbcon: i915drmfb (fb0) is primary device[ 7.888378] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer deviceCode:
[ 7.265006] i915 0000:00:02.0: [drm] VT-d active for gfx access[ 7.265194] i915 0000:00:02.0: vgaarb: deactivate vga console[ 7.265262] i915 0000:00:02.0: [drm] Using Transparent Hugepages[ 7.289816] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem[ 7.291113] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])[ 7.292246] i915 0000:00:02.0: firmware: direct-loading firmware i915/icl_dmc_ver1_09.bin[ 7.292735] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9)[ 7.330725] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0[ 7.332583] i915 display info: display version: 11[ 7.332586] i915 display info: cursor_needs_physical: no[ 7.332588] i915 display info: has_cdclk_crawl: no[ 7.332589] i915 display info: has_cdclk_squash: no[ 7.332590] i915 display info: has_ddi: yes[ 7.332591] i915 display info: has_dp_mst: yes[ 7.332592] i915 display info: has_dsb: no[ 7.332593] i915 display info: has_fpga_dbg: yes[ 7.332594] i915 display info: has_gmch: no[ 7.332595] i915 display info: has_hotplug: yes[ 7.332596] i915 display info: has_hti: no[ 7.332597] i915 display info: has_ipc: yes[ 7.332597] i915 display info: has_overlay: no[ 7.332598] i915 display info: has_psr: yes[ 7.332599] i915 display info: has_psr_hw_tracking: yes[ 7.332600] i915 display info: overlay_needs_physical: no[ 7.332601] i915 display info: supports_tv: no[ 7.332602] i915 display info: has_hdcp: yes[ 7.332603] i915 display info: has_dmc: yes[ 7.332604] i915 display info: has_dsc: yes[ 7.360262] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])[ 7.361891] fbcon: i915drmfb (fb0) is primary device[ 7.419678] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer deviceStatistics: Posted by dmr1848 — 2024-08-26 21:45 — Replies 2 — Views 73